Machines

9.0-L (549-cu in.) Final Tier 4 (FT4) John Deere engine

The Hagie STS14 is powered by the PowerTech PSS 9.0-L (549-cu in.) John Deere diesel engine, which is offered in a 246-kW (330-hp) FT4 configuration.

 

These turbocharged, air-to-air aspirated engines deliver consistent power over a wide range of engine speeds (rpm) with a power bulge rated speed to provide excellent torque in demanding applications.

 

Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, John Deere will also support Hagie equipment.

The solution system is a constantly monitored, continuously adjusted, computer-controlled system. The cab-mounted digital spray system console receives information from various inputs to help determine L/ha (gpa) and L/min (gpm).

Solution tank

Sprayer model	Tank capacity	Tank type
STS10	3785 L (1000 gal.)	Stainless-steel tank
STS12	4542 L (1200 gal.)	Stainless-steel tank
STS14	5299 L (1400 gal.)	Stainless-steel tank
STS16	6056 L (1600 gal.)	Stainless-steel tank

 

Solution pump

The Hypro® 9306C-HM1C-BU solution pump (located beneath center of machine) is a centrifugal-type, hydraulically-driven pump that is controlled by the solution pump control valve and the spray system console. It comes with silicon-carbide seals, 7.6-cm (3-in.) inlet plumbing and 5.1-cm (2-in.) outlet plumbing.

 

The solution pump draws solution out of the tank at the rate determined during calibration. It dispenses solution through the many valves and hoses that make up the spray system and also dispenses fluids through the agitation and rinse systems.

Solution pump switch

The solution pump switch is located on the side console and is used to turn the solution pump on and off.

NOTE: When the solution pump is on, a solution pump indicator (located on the machine display home page - field mode) will be illuminated.

 

Hypro is a trademark of Pentair Flow Technologies, LLC.

The spray booms are controlled by an electrohydraulic system. This system consists of operator-manipulated switches (located on the side console and the hydrostatic drive control handle) and hydraulic cylinders (attached to the booms), which provide lift, level, and horizontal extension.

The spray booms are offered in a variety of configurations depending on the model and the producer's application needs.

 

27.4-m (90-ft) boom with 38.1-cm (15-in.) row spacing

Numerical values key:

1. Section one
2. Section two
3. Section three
4. Section four
5. Section five
6. Section six
7. Section seven
8. Section eight
9. Section nine

Alphabetical values key:

1. 18.3-m (60-ft) 24-row planter
2. 9.1-m (30-ft) 12-row planter
3. 9.1-m (30-ft) 12-row planter
4. 9.1-m (30-ft) 12-row planter

30.5-m (100-ft) boom with 38.1-cm (15-in.) row spacing

Numerical values key:

1. Section one
2. Section two
3. Section three
4. Section four
5. Section five
6. Section six
7. Section seven
8. Section eight
9. Section nine

Alphabetical values key:

1. 18.3-m (60-ft) 24-row planter
2. 3.05 m (10 ft)
3. 9.1-m (30-ft) 12-row planter
4. 9.1-m (30-ft) 12-row planter
5. 9.1-m (30-ft) 12-row planter
6. 3.05 m (10 ft)

36.6-m (120-ft) boom with 38.1-cm (15-in.) row spacing

Numerical values key:

1. Section one
2. Section two
3. Section three
4. Section four
5. Section five
6. Section six
7. Section seven
8. Section eight
9. Section nine

Alphabetical values key:

1. 9.1 m (30 ft)
2. 18.3-m (60-ft) 24-row planter
3. 9.1 m (30 ft)
4. 9.1-m (30-ft) 16-row planter
5. 9.1-m (30-ft) 16-row planter
6. 9.1-m (30-ft) 16-row planter
7. 4.6 m (15 ft)
8. 9.1-m (30-ft) 12-row planter
9. 9.1-m (30-ft) 12-row planter
10. 9.1-m (30-ft) 12-row planter
11. 4.6 m (15 ft)

Boom configurations

STS Series model	Boom location	Minimum boom width	Maximum boom width	Number of boom sections	Wet boom nozzle spacing
STS10	Front	27.4 m/30.5 m (90 ft/100 ft)	36.6 m (120 ft)	Nine	38 or 51 cm (15 or 20 in.)
STS12	Front	27.4 m/30.5 m (90 ft/100 ft)	36.6 m (120 ft)	Nine	38 or 51 cm (15 or 20 in.)
STS14	Front	27.4 m/30.5 m (90 ft/100 ft)	36.6 m (120 ft)	Nine	38 or 51 cm (15 or 20 in.)
STS16	Front	27.4 m/30.5 m (90 ft/100 ft)	27.4 or 36.6 m (90 or 120 ft)	Nine	38 or 51 cm (15 or 20 in.)

Materials used in boom construction:

• 27.4-m/30.5-m (90-ft/100-ft) booms - steel
• 36.6-m (120-ft) booms - steel/aluminum hybrid

The STS Series mainframe design features horizontal cross-through axle tubes, as well as boom and platform mounts on weldment.

• 144.8-cm (57-in.) mainframe width (from outside of each mainframe tube)
• 301-cm (118.5-in.) mainframe width (from outside of each boom cradle weldment)
• 183-cm (72-in.) ground clearance