Overview
- 22 HP* V-Twin smooth running engine
- Deep deck design helps lift grass for a superior cut
- Improved deck lift lever raises and lowers deck easily
- Operator station is wide and comfortable
- High-back seat is easily adjustable
Features
Features
Engine is powerful and smooth-running V-twin design
A 22-hp (16.4-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Electronic ignition for fast starts
- Spring-return feature to ensure the operator will not mistakenly leave the throttle lever in the choke position
- Cast-iron cylinder liners for longer engine life
- Overhead valves for excellent power and fuel economy
- Full-pressure lubrication and oil filter for cleaner oil, prolonging engine life and extending the time between oil changes
- More effective when operating the tractor on an incline
Fuel tank has gauge to show fuel level from the operator's seat
The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator's seat:
- Easy to check fuel level
- Convenient location
Fuel tank:
- The capacity is 2.4 U.S. gal. (9.1 L).
- The fuel-filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- A tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.
- The tractor has a California Air Resources Board (CARB) certified engine for reduced air pollution.
Frame made of full-length welded steel for reliability
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.66-mm) steel:
- Full-length, robotically-welded frame design has high-strength steel rails for added strength and long life.
- One-piece, steel fender deck is bolted to the frame.
Cast-iron front axle will not bend
The front axle is constructed of solid cast iron that will not bend:
- Automotive-like steering system with sector and pinion steering gears and single drag link with a tie rod provides a very strong, low-effort, and tight-turning system.
- Three grease fittings, on both steering spindles and center pivot, allow for regular lubrication to help maintain easy steering and minimize wear.
- Large, 0.75-in. (1.9-cm) diameter wheel spindles provide excellent durability.
CargO Mount™ system makes installation of rear bagger and other attachments easy
The CargO Mount system is a combination of front- and rear-mounting points providing convenient and easy installation of the sun canopy, rear bagger, and other attachments.
Snow removal is a strength of lawn tractors
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
- 44-in. (112-cm) Snow Blower
- 46-in. (117-cm) Front Blade
- Tire chains or TerraGrip traction belts
- Weather enclosure
- Weights
Hydrostatic transmission gives an infinite choice of ground speeds
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy. Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Appropriate transmissions are used in each model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
- Tuff Torq TLT200A - E110, E120, E130
- Tuff Torq TLT200B - E140, E150, E160
- Tuff Torq K46AC - E170, E180
Standard cruise control (E120, E130, E150, E160, E170, and E180)
An easy-to-use cruise control option maintains the tractor's speed for mowing larger areas:
- To engage, lift up on the cruise lever and hold it until the foot is removed from the forward pedal.
- To disengage, lightly press and then release the forward pedal.
- For emergency stops, cruise can be released by pushing on the brake pedal or pushing down on the cruise control lever.
NOTE: Cruise control is available on all models except the E100, E110, and E140.
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Manufacturing Company.
Operator station designed for comfortable operation
The operator station is designed for operator comfort and easy operation:
- Controls are positioned where they are easy to reach and use to control the tractor.
- The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
- The seat is tilted back at the optimum angle to provide the most comfortable operator position.
Controls are easy to see and use:
- Large, three-spoke steering wheel for greater operator comfort and control
- Ignition switch is on the dash for starting ease
Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:
- Debris removing channels help keep the footrest area clean and dry
- The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
The operator seat has a 15-in. (38.1-cm) back height for good support. It is especially helpful when operating the tractor for extended periods of time. It can be easily adjusted forward or rearward while in the seat, with seat travel of 5.5 in. (14 cm) and 10 different positions.
Two long seat springs give plenty of seat travel to smooth out the ride, keeping the operator comfortable while operating the tractor.
The seat can be tilted forward for protection from the elements and to provide easy access to the fuel tank.
A storage compartment and beverage holder, located on the right-side fender, are conveniently located and easy to use.
NOTE: A storage compartment cover is standard on E120, E130, E150, E160, E170 and E180 Tractors and optional on the E110 and E140.
Instruments and controls are easy to find and convenient to use
Instruments and controls
The contoured dash has clean, attractive styling:
-
Controls are color coded and labeled for easy identification by the operator.
-
Controls are logically placed and easy to reach.
-
The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- A service reminder feature will indicate that a general lubrication or mower/engine service interval has been reached.
- When service is required, arrows will periodically flash for two hours.
-
Functional design of the controls provides good appearance and a comfortable feel.
Side-by-side transmission control pedals
Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- Operator can change direction without lifting foot off the platform.
- Large pedal surface gives superior operator comfort.
Cruise control (E120, E130, E150, E160, E170, and E180)
Cruise control is available on the E120, E130, E150, E160, E170, and the E180:
- To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
- For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
-
Increments of 0.25 in. (0.64 cm) allow fine-tuning the cut height.
-
Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
Parking brake control
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.
Electric power take-off (PTO) clutch is easy and convenient to use
The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.
Reverse implement option (RIO)
Using RIO
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
- Carefully check the area around the machine.
- Disengage the mower before backing up.
NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
- Stop forward travel.
- Look behind the machine to be sure there are no bystanders.
- Push and hold in the RIO switch while depressing the reverse pedal slightly for a hydrostatic transmission or moving the transmission shift lever to the rear slot (reverse) for a continuously variable transmission (CVT)/automatic transmission.
NOTE: If the engine and mower or other attachment stops while repositioning the machine, return the attachment engagement lever/switch to the off position. Start the engine and engage mower or other attachment. Begin again with step 2.
- Release the RIO switch and reposition the machine as the machine begins to move rearward.
- Resume forward travel. The mower or other attachment should continue operating.
- Repeat procedure to position the machine again.
Serviceability is convenient with an easy-open hood
The one-piece hood opens easily to permit checking and servicing the engine:
- Important service points are located within easy reach.
- A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
- Hour meter includes a service reminder feature that flashes for two hours when a lubrication or mower/engine service interval has been reached.
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
The seat tilts up and out of the way to make adding fuel easy.
The 100 Series Tractors are covered by a 2-year/120-hour bumper-to-bumper warranty*:
- Premium features of 100 Series Tractors allow for this long warranty period.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Hood will not dent or rust and includes quality headlights for good visibility
The hood is made of molded-in color material:
- Reduces sound
- Will not rust or dent
- Openings on the side of the hood let in plenty of cooling air while keeping the sound level low.
- Two headlights provide good lighting for nighttime operation.
The MowerPlus™ app helps maintain the tractor and lawn
Keep a John Deere riding lawn mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the lawn tractor’s barcode to get custom information. The app helps determine the best time to mow, communicates expert pre-mow tips, offers maintenance reminders, and provides walk-through guides.
Look for the MowerPlus app on the iOS® or Android™ system app stores.
The app supports residential lawn equipment such as 100 Series, S240, X300, X500, X700, Z200 through Z600, and many similarly-sized older products. It does not presently support tractor models numbered 1000 and larger, such as 1025R.
NOTE: Some product image variation may exist.
MowerPlus hour meter connector also available (sold separately)
The John Deere MowerPlus hour meter connector wirelessly links a 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device. The hour meter connector transmits engine usage to the app, making it easy to track maintenance intervals:
- iOS version 10 or higher is compatible with the hour meter connector.
- Android versions are not compatible with the hour meter connector at this time.
iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC.
The Edge™ cutting system gives superior performance
The Edge cutting system has been trademarked to emphasize the advantages of the John Deere mower deck designs. They give superior convenience, performance, and reliability:
- Deep-deck mower design lifts grass for a clean, even cut.
- Smooth underside of mower prevents grass buildup and evenly disperses grass clippings.
- The rolled outer edge of the deck provides extra strength and protection.
- Dual-stage E-coat and powder paint coatings provide extra protection from rust.
The 48-in. (121.9-cm) Edge mower deck is a three-spindle design with heavy-duty characteristics:
- Four mower wheels are standard equipment for a smooth mowing job, even in rolling terrain.
- Flexible discharge chute minimizes property and mower deck damage.
- No tools are required to go from mulching (with mulch cover) to side discharge to rear bagging.
- A mulch cover is an optional attachment that can be installed without the use of tools.
- A high-performance mulching blade (GX21786) is available to enhance mulching performance.
- Bagging blades are available to improve bagging performance.
The mower deck has a rolled lip to provide greater strength and protection. The rugged 12-gauge, 0.105-in. (2.7-mm) steel-deck mower will provide years of dependable mowing.
The blade-to-spindle design provides a unique mounting system for the mower blade that gives extra safety and convenience.
A cut-and-throw, 6.5-bu (229-L) rear bagger is sold separately and comes with bagging blades.
Mower wash port
A wash port is provided to make cleaning the underside of the mower deck easy:
-
A hose connector is included with mower deck.
StarLock™ blade design
The StarLock blade design keeps the blade bolt at the correct torque for easy removal.
Optional blades for difficult mulching or bagging conditions are available.
Mower deck height adjustment
A spring-assisted, low-effort lift lever simplifies setting and adjusting the mower cut height:
- Increments of 0.25 in. (0.64 cm) allow the operator to fine-tune the cut height.
- Cut height is adjustable from 1 in. (2.5 cm) to 4 in. (10.2 cm).
- The lift handle is shaped and located for easy use and is out of the way of entering or exiting operators.
Two-year or 120-hour bumper-to-bumper warranty is standard
An exclusive 2-year or 120-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 100 Series Tractors.
- The warranty is hassle free, with one company handling all of the paperwork.
- Premium features of 100 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.