Overview
- Compatible with the 1023E, 1025R and 2025R tractors
- Quik-Park stands for easy attachment and removal
- 754 lbs. (342 kg) of lift capacity
- 72 in. (1,828 mm) of lift height
Features
Features
Easily remove and mount loader to and from the tractor without tools
Quik-Park™ loader mounting system
The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.
Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.
Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without tools
D120
The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.
Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).
Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.
After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
Pivot pins shown on the 120R Loader
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.