Groundsmaster® 3280 52"-72" (1.3m-1.8m) Cutting Width
The Groundsmaster® 3280-D is an all-purpose out-front rotary mower able to meet the stringent cutting demands of today. Operators will appreciate the excellent traction control thanks to the innovative bi-directional overrunning clutch, which senses traction needs. The unit features optional on-demand four-wheel drive in forward and reverse, and the adjustable front baffle is easily adjusted in a matter of seconds without requiring tools. Additionally, the optional air ride seat suspension and electric-clutch deck engagement helps to minimize operator fatigue. Available deck sizes range from 52” – 72“ width of cut in side discharge, rear discharge and Guardian™ Recycler™ configurations.
Greensmaster® 800 - 18" (46cm) Cutting Width
The legendary Toro® Greensmaster® 800 / 1000 / 1600 series has a cutting width range of 18", 21” and 26", respectively. All models in the line boast convenient operator controls, precision cut, and an ergonomic loop handle design to reduce operator fatigue and increase productivity. These units offer a number of maintenance features to ensure a long and productive life, including quick access to all service points for routine maintenance, and a forward weight bias which balances the machine and sets an industry standard for straight line tracking. This also ensures a pristine cut regardless of operator influence.
- 4.3hp (3.2kW) Subaru® gas engine
- Dual Cast Aluminum Traction Drums with A-Section V-Belts
- 18" (46cm) Cutting Width
- Ground Speed - Mowing: 1.5-3.3 mph (2.4-5.3 km/h) Transport: 0-5 mph (0-8 km/h)
LARGE BREAKERS
Hyundai small breakers are suited to fit compact size excavators ranging from 30 ton to 80 ton. If equipped on a Hyundai compact excavator, standard equipped mounting brackets are designed to match up perfectly with the Hyundai linkage. If you would like to use on another brand of excavator, Hyundai dealers can match a custom mounting bracket to fit any machine.
BREAKER OPERATING WEIGHT RANGE
2,832 kg (6,243 lb) to 5,625 kg (12,401 lb)
IMPACT POWER RANGE
8,550 J (11,600 ft-lb) to 16,200 J (22,000 ft-lb)
BLOW RATE RANGE
300 - 500 bpm
MIDSIZE BREAKERS
Hyundai small breakers are suited to fit compact size excavators ranging from 14 ton to 25 ton. If equipped on a Hyundai compact excavator, standard equipped mounting brackets are designed to match up perfectly with the Hyundai linkage. If you would like to use on another brand of excavator, Hyundai dealers can match a custom mounting bracket to fit any machine.
BREAKER OPERATING WEIGHT RANGE
929 kg (2,048 lb) to 2,165 kg (4,773 lb)
IMPACT POWER RANGE
2,730 J (2,000 ft-lb) to 6,530 J (8,850 ft-lb)
BLOW RATE RANGE
300 - 750 bpm
SMALL BREAKERS
Hyundai small breakers are suited to fit compact size excavators ranging from 1.7 ton to 8 ton. If equipped on a Hyundai compact excavator, standard equipped mounting brackets are designed to match up perfectly with the Hyundai linkage. If you would like to use on another brand of excavator, Hyundai dealers can match a custom mounting bracket to fit any machine.
BREAKER OPERATING WEIGHT RANGE
115 kg (253 lb) to 614 kg (1,354 lb)
IMPACT POWER RANGE
190 J (140 ft-lb) to 2,050 J (1,500 ft-lb)
BLOW RATE RANGE
550 - 1,250 bpm
HR140C (TIER 4 FINAL)
All Hyundai C Series compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. The single-drum HR140C (Tier 4 Final) models is designed primarily for soil compaction applications and is powered by a highly fuel-efficient and reliable Deutz diesel engine. The compaction drum is available as a smooth or pad-foot surface.
DRUM WIDTH
2,100 mm (83 in)
WEIGHT
14,000 kg (30,865 lbs)
LINEAR DRUM LOAD
38.57 kg/cm
HR120C (TIER 4 FINAL)
All Hyundai C Series compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. The single-drum HR120C (Tier 4 Final) models is designed primarily for soil compaction applications and is powered by a highly fuel-efficient and reliable Cummins diesel engine. The compaction drum is available as a smooth or pad-foot surface.
DRUM WIDTH
2,100 mm (82.7 in)
WEIGHT
12,300 kg (27,115 lbs)
LINEAR DRUM LOAD
33.81 kg/cm
HR110C (TIER 4 FINAL)
All Hyundai C Series compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. The single-drum HR110C (Tier 4 Final) models is designed primarily for soil compaction applications and is powered by a highly fuel-efficient and reliable Cummins diesel engine. The compaction drum is available as a smooth or pad-foot surface.
DRUM WIDTH
2,100 mm (83 in)
WEIGHT
11,700 kg (25,800 lbs)
LINEAR DRUM LOAD
30.0 kg/cm
HR70C (TIER 4 FINAL)
All Hyundai C Series compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. The single-drum HR70C (Tier 4 Final) model is designed primarily for soil compaction applications and is powered by a highly fuel-efficient and reliable Deutz diesel engine. The compaction drum is available as a smooth or pad-foot surface.
DRUM WIDTH
1,700 mm (67 in)
WEIGHT
7,100 kg (15,650 lbs)
LINEAR DRUM LOAD
22.35 kg/cm
HR30T-9
All Hyundai Series 9 compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. While the Hyundai HR30T-9 tandem-drum roller model is primarily designed for aggregate paving applications and is powered by a highly fuel-efficient and reliable Deutz diesel engine.
DRUM WIDTH
1,250 mm (49.2 in)
WEIGHT
3,000 kg (6,614 lbs)
LINEAR DRUM LOAD
12.00 kg/cm
HR26T-9
All Hyundai Series 9 compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. While the Hyundai HR26T-9 tandem-drum roller model is primarily designed for aggregate paving applications and is powered by a highly fuel-efficient and reliable Deutz diesel engine.
DRUM WIDTH
1,200 mm (47.2 in)
WEIGHT
2,900 kg (6,393 lbs)
LINEAR DRUM LOAD
12.08 kg/cm
HR25T-9
All Hyundai Series 9 compaction roller models are designed with serviceability in mind. Engines and other components are easily accessible, thanks to the wide opening engine hood that provides 270-degree, front and side access. While the Hyundai HR25T-9 tandem-drum roller model is primarily designed for aggregate paving applications and is powered by a highly fuel-efficient and reliable Deutz diesel engine.
DRUM WIDTH
1,000 mm (39.3 in)
WEIGHT
2,700 kg (5,952 lbs)
LINEAR DRUM LOAD
13.50 kg/cm
HL955 TM
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
197 hp (147 kW) at 2,200 rpm
OPERATING WEIGHT
15,600 kg (34,390 lbs)
STANDARD BUCKET
2.7 m3 (3.5 yd3)
HL940 TM
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
156 hp (116 kW) at 2,100 rpm
OPERATING WEIGHT
13,600 kg (29,980 lbs)
STANDARD BUCKET
2.3 m3 (3.0 yd3)
HL980 XT
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
376 hp (280 kW) at 1,800 rpm
OPERATING WEIGHT
31,700 kg (69,887 lbs)
STANDARD BUCKET
5.6 m3 (7.3 yd3)
HL980
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
376 hp (280 kW) at 1,800 rpm
OPERATING WEIGHT
31,570 kg (69,600 lbs)
STANDARD BUCKET
5.6 m3 (7.3 yd3)
HL975 XT
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
331 HP (247 kW) / 2,100 rpm
OPERATING WEIGHT
27,295 kg (60,175 lbs)
STANDARD BUCKET
4.8 m3 (6.3 yd3)
HL975
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
331 HP (247 kW) / 2,100 rpm
OPERATING WEIGHT
26,500 kg (58,430 lbs)
STANDARD BUCKET
4.8 m3 (6.3 yd3)
HL970XT
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
308 hp (230 kW) at 2,100 rpm
OPERATING WEIGHT
24,200 kg (53,352 lbs)
STANDARD BUCKET
4.2 m3 (5.5 yd3)
HL970
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
NET POWER
308 hp (208 kW) at 2,100 rpm
OPERATING WEIGHT
24,040 kg (52,999 lbs)
STANDARD BUCKET
4.2 m3 (5.5 yd3)